Contents of Journal of Mechanical Engineering - Strojnícky časopis, 2018, Volume 68, No. 3:

Investigation of Defect Effects on Adhesively Bonded Joint Strength using Cohesive Zone Modeling
MAJID Jamal-Omidi, MOHAMED REZA Mohammadi Suki
DOI: 10.2478/scjme-2018-0023
pp. 5 - 24 [online]


Effect of Tapered Interference Fit between Impeller and Shaft in Turbo Machines
NILESH Vishwakarma, AVINASH Renuke, V.M. Phalle
DOI: 10.2478/scjme-2018-0024
pp. 25 - 32 [online]


A Closed – Form Buckling Formula for Open – Coiled and Properly Supported Circular – Bar Helical Springs
YILDIRIM Vebil
DOI: 10.2478/scjme-2018-0025
pp. 33 - 48 [online]


Effect of Additives on Static Settled Concentration, pH and Viscosity of Bottom Ash-Water Suspension
KAUSHAL Kumar, SATISH Kumar, AJAY Kumar
DOI: 10.2478/scjme-2018-0026
pp. 49 - 58 [online]


Dynamic Modelling and Analyzing of a Walking of Humanoid Robot
BAJRAMI Xhevahir, SHALA Ahmet, HOXHA Gezim, LIKAJ Rame
DOI: 10.2478/scjme-2018-0027
pp. 59 - 76 [online]


Influence of In - Plane Deformation in Higher Order Beam Theories
SAPOUNTZAKIS Evangelos, ARGYRIDI Amalia
DOI: 10.2478/scjme-2018-0028
pp. 77 - 94 [online]


Mathematical Model for Velocity Calculation of Three Types of Vehicles in the Case of Pedestrian Crash
HOXHA Gëzim, SHALA Ahmet, LIKAJ Ramë, BAJRAMI Xhevahir
DOI: 10.2478/scjme-2018-0029
pp. 95 - 110 [online]


Do not be afraid of Small High – Speed Francis Turbines
KOUDELKA Libor
DOI: 10.2478/scjme-2018-0030
pp. 111 - 128 [online]


Optimization of Sluice Gate under Fatigue Life Subjected for Forced Vibration by Fluid Flow
HANDRAL Poornakanta, KARTIK Kadam, DARSHAN Pawar, KIRAN Medar, ILIYAS Makandar, ARUN Y. Patil, BASAVARAJ B Kotturshettar
DOI: 10.2478/scjme-2018-0031
pp. 129 - 142 [online]


Detection and Modeling Vibrational Behavior of a Gas Turbine Based on Dynamic Neural Networks Approach
BENRAHMOUNE Mohamed, HAFAIFA Ahmed, GUEMANA Mouloud, CHEN XiaoQi
DOI: 10.2478/scjme-2018-0032
pp. 143 - 166 [online]


Rooppur Nuclear Power Plant: Current Status & Feasibility
SABHASACHI Saha, KOUSHIK Roy, SOUVIK Roy, MD. ASFAKUR Rahman, MD. ZAHID Hasan
DOI: 10.2478/scjme-2018-0033
pp. 167 - 182 [online]


Analysis of Bolt Bending in Preloaded Bolted Joints
WELCH Michael
DOI: 10.2478/scjme-2018-0034
pp. 183 - 194 [online]


Optimization of Process Parameters for FSW of Al-Mg-Mn-Sc-Zr Alloy using CCD and RSM
SRINIVASA RAO Mallipudi, RAMANAIAH Nallu
DOI: 10.2478/scjme-2018-0035
pp. 195 - 224 [online]


Frequency Response Function Measurement on Simplified Disc Brake Model
ÚRADNÍČEK Juraj, MUSIL Miloš, BACHRATÝ Michal
DOI: 10.2478/scjme-2018-0036
pp. 225 - 230 [online]


Determination of Tungsten Inert Gas Welding Input Parameters to Attain Maximum Tensile Strength of 316L Austenitic Stainless Steel
MOI Subhas Chandra, PAL Pradip Kumar, BANDYOPADHYAY Asish, RUDRAPATI Ramesh
DOI: 10.2478/scjme-2018-0037
pp. 231 - 248 [online]


Some Facts Resulting from the Key Variables used in the Description of the Recuperative Heat Exchangers
GUŽELA Štefan, DZIANIK František
DOI: 10.2478/scjme-2018-0038
pp. 249 - 260 [online]


The Influence of Material on the Operational Characteristics of Spur Gears Manufactured by the 3D Printing Technology
DIMIĆ Aleksandar, MIŠKOVIĆ Žarko, MITROVIĆ Radivoje, RISTIVOJEVIĆ Mileta, STAMENIĆ Zoran, DANKO Ján, BUCHA Jozef, MILESICH Tomáš
DOI: 10.2478/scjme-2018-0039
pp. 261 - 270 [online]


Express Method to Estimate Structural Imperfection and Bone Tissue Status
CHAUSOV Mykola, PYLYPENKO Andrii, MARUSCHAK Pavlo, TKACHUK Svitlana, MENOU Abdellah
DOI: 10.2478/scjme-2018-0040
pp. 271 - 280 [online]


Adaptive Car Following Model
MIKA, Peter
DOI: 10.2478/scjme-2018-0041
pp. 281 - 288 [online]


back